At a glance
Choose the power option around total takeoff weight and the site supply. Then decide where the operator needs the video and whether to include the optional fiber-optic controller.
If your crew needs to keep watching the same area from above, decide where the aircraft will work and where the operator needs to see the picture. We can use those locations to discuss the power supply and how video and control will reach the operator.
Compare the power options
Our TP Tethered UAV Monitoring System has two alternative ground and airborne power configurations. Start with the total expected takeoff weight, including the aircraft and its equipment. Then check the power available at the site.
| Monitoring configuration | Recommended total takeoff weight | Site supply |
|---|---|---|
| TP-T4H ground station with TP-P4 airborne module | Below 20 kg | Single-phase 220 VAC, 50 Hz |
| TP-T6 ground station with TP-P6 airborne module | Below 30 kg | Single-phase, 50 Hz. Nominal 220 VAC, accepts 200–230 VAC. |
Both come with a 120 m tether by default. Ask us to review the operating height you need against the aircraft, payload, tether and site conditions. The weight figures apply to the respective monitoring configurations. Confirm the aircraft and its operating limits as part of the system review.
Decide where the video needs to go
The P-EOP gimbal provides visible-light and thermal imaging, with Micro HDMI and IP video outputs. For wired video and control, we can configure a fiber-optic tether. If you want a fiber-optic remote controller, list it separately as an option in your enquiry.
If you plan to keep an existing display or receiver, share its model and available connections. Our guide to power and fiber connections shows what to check at each end.
Give Stella a starting point
Send Stella the area you need to observe and the expected operating height. If you know the site power, planned payload or operator location, add those details. We can discuss which configuration fits the brief and what to include for video, control and backup power.


