Equipment & project planning
Tethered drone
selection guides
Explore the decisions behind a tethered drone system, from power and cable requirements to the equipment needed for your application.
Browse the product libraryAirborne power & integration
Explore this topic →How to Specify an Onboard Tethered Drone Power Module
Prepare the voltage, load, mounting and cooling information needed to select an airborne DC-DC module for a tethered UAV.
Read guide →Continuous, Rated and Peak Power in a Tethered Drone System
Understand which power figures belong in a tethered UAV comparison and how to describe load duration in an integration brief.
Read guide →Battery Backup and Power Sharing in a Tethered Drone
Review how a tethered airborne power module works with the aircraft battery, including normal load, transient demand and the response to loss of ground power.
Read guide →Tether Voltage, Cable Loss and Airborne Power: What to Compare
Organize tether voltage, current, cable length and converter input information before comparing a ground-to-air power architecture.
Read guide →Power Requirements for a Drone Communications Relay
Plan ground and airborne power for a drone carrying communications equipment. Separate aircraft demand, payload supply, data connections and installation needs.
Read guide →Preparing an eVTOL Ground-Test Power Requirement
Structure an early power-supply enquiry for an eVTOL or high-power UAV test project around the DC bus, load profile and test environment.
Read guide →Ground power & tether
Explore this topic →Choosing the AC Supply for a Tethered Drone Ground Station
Compare site mains, a generator and a mobile power station against the selected ground station's actual AC input requirements.
Read guide →How to Match a Ground Station and an Airborne Power Module
Match the ground output, tether and airborne input before choosing a tethered drone power system. Compare the interfaces that determine a usable configuration.
Read guide →Tether Length vs Operating Height: Planning a Drone Deployment
Separate cable length from working height and describe the site layout, payload and cable route needed for a tethered-system review.
Read guide →What to Ask About a Tether Cable and Reel
Review cable handling, interfaces, deployment space and replacement requirements when specifying a tethered drone ground system.
Read guide →Planning Power and Fiber Connections for a Tethered UAV
Plan the electrical supply and fiber data path in a tethered UAV, including endpoint interfaces, conversion equipment, cable handling and module selection.
Read guide →Complete Tethered System or Separate Components? Define the Supply Scope
Compare buying a named tethered configuration with sourcing ground stations, airborne modules and accessories for an integration project.
Read guide →DJI platforms & accessories
Explore this topic →DJI Tethered System Compatibility: What to Confirm Before Ordering
Check the exact DJI model, accessory function, power interface and installation scope before selecting a tethered configuration.
Read guide →Can Your Existing Drone Use Tethered Power?
Plan a tethered power conversion around your existing drone, its electrical requirements and payload allowance. See which equipment you can retain and what to add.
Read guide →Matrice 400 Cleaning Setup: Boom, Pump, Hose and Nozzle
Prepare a DJI Matrice 400 cleaning enquiry around the spray accessory, ground water supply, hose route and required working distance.
Read guide →Planning a Mavic 3 Tethered Power Enquiry
Organize aircraft, payload, deployment and ground-power information before requesting a TP-Mavic3 configuration.
Read guide →Drone cleaning systems
Explore this topic →Drone Cleaning Pump and Hose: Information for a Matched Setup
Prepare pump, hose, height and nozzle details for a cleaning-system proposal instead of selecting a spray accessory from pressure alone.
Read guide →Water Tethers and Power Tethers for Cleaning Drones
Understand the separate water and electrical paths in a cleaning drone setup, from ground pump and hose to ground power station and airborne power module.
Read guide →Choosing a Drone Cleaning Nozzle: Pattern, Interface and Test Conditions
Compare nozzle requirements by surface, spray pattern, water supply and connection details for a drone cleaning enquiry.
Read guide →Adding Drone Cleaning to Your Existing Equipment
Plan a drone cleaning equipment purchase around the pump, aircraft and site equipment you already own. Identify the spray and power components your project needs.
Read guide →A Site-Survey Brief for Drone Façade Cleaning
Collect surface, access, working-distance, water-supply and evaluation details before requesting a drone façade-cleaning equipment proposal.
Read guide →Selecting Drone Equipment for Solar Panel Cleaning
Plan a photovoltaic cleaning equipment enquiry around panel layout, surface requirements, water delivery and the selected aircraft configuration.
Read guide →Lighting & firefighting
Explore this topic →Aerial Lighting: Comparing Lumens, Lux and Coverage
Prepare an aerial-lighting requirement using the work area, illumination objective and deployment conditions rather than a lumen figure alone.
Read guide →Aerial Tethered Lighting vs a Ground Light Tower: A Planning Comparison
Compare deployment space, lighting geometry, power supply and operating arrangements when considering aerial lighting alongside a light tower.
Read guide →Drone Firefighting Bucket vs Hose-Fed Equipment: Define the Requirement
Separate a carried firefighting bucket from hose-fed equipment when planning an aircraft payload and water-delivery enquiry.
Read guide →Quotations & project planning
Explore this topic →What to Send for a Tethered Drone System Quotation
Prepare a concise project brief with the aircraft, task, power requirements, site conditions and equipment scope needed for a useful quotation.
Read guide →How to Compare Tethered Drone Equipment Quotations
Compare supply scope, rating conditions, interfaces, documentation and support before deciding between tethered-system offers.
Read guide →Planning a Tethered Drone Evaluation Package for Distributors
Define a representative demonstration configuration, supporting documents and customer questions for an initial distributor equipment enquiry.
Read guide →Requesting Replacement Parts for a Tethered Drone System
Identify the installed model, component and interface information needed for a precise spare-parts or support enquiry.
Read guide →Already have a project in mind?
Send the aircraft model, task, required operating height and available ground power. Include the equipment you already own so the quotation can focus on what you need.
Discuss your configurationTethered power for your project
We can discuss the modules, interfaces and accessories around your aircraft, including requirements beyond the listed configurations.
OEM and ODM Tethered Power Systems
We support OEM supply, private labeling and joint development around airborne power modules and ground power stations. Bring your aircraft, product requirements and intended supply scope, and we can discuss the right starting point.
Discuss your requirements →Custom Tethered Power Modules and Ground Stations
We configure tethered power around your aircraft and task. Alongside our listed modules, we can discuss changes to voltage, cable, connectors and mounting, with the supply scope defined for your project.
Discuss your requirements →Tethered Power Integration for Your Aircraft
We help define the ground and airborne power equipment for your aircraft. Whether you are converting an existing drone or integrating a new platform, we can review the modules and interfaces around your installation.
Discuss your requirements →