At a glance
With our TP-Matrice M350, you can evaluate tethered power for an existing DJI Matrice 300/350. Focus your upgrade offer on work that benefits from staying near a ground supply, then verify the aircraft and complete installation.
Start with the aircraft you already support
If you sell or maintain DJI Matrice 300/350 aircraft, you can evaluate our TP-Matrice M350 as an additional offer for fixed-site observation or inspection. You can discuss an upgrade around an existing aircraft rather than making a new aircraft purchase the starting point.
Begin with a defined observation area, payload and operating period. You need to check whether your work can remain within the tethered area and whether you can place a suitable ground supply nearby. For a route that continually moves away from that point, you should assess a different operating arrangement.
Quote the ground and airborne equipment together
With our system, you use a 110 m cable and a ground unit with 220 VAC input. You receive 48 VDC output at 2500 W from the airborne module. You should not treat the cable length as your approved flight height or the module output as spare payload power.
Allow for a 500 ± 10 g airborne module and a 13.5 ± 0.5 kg ground unit. Include the full installation, tether load path and your payload when checking balance and operating limits. Follow the manual for the required battery installation and pre-use charging; you must not assume that tethered power lets you remove every onboard battery. Use our battery integration guide for your planning questions.
Make your upgrade service tangible
As a dealer, you can consider an equipment package with separately described configuration assessment, installation work and handover where you can provide those services. You can start with a demonstration on a representative aircraft before proposing further fleet installations. We can help you review the equipment requirements and provide remote technical support.
Include these items in your offer:
- Record your aircraft model, payload, mounting and suitable site supply.
- Define your installation checks, demonstration task and handover documents.
- Agree your inspection schedule and confirm any spare-part stock with our sales team.
Measure the value of the added work
Compare your complete operating time with the battery-powered method you currently use. Include setup, relocation, cable handling, supervision and packing. You can assess the value of longer on-task periods only after you account for the additional ground work and maintenance.
For your dealer margin, separate equipment revenue from the services you deliver, then deduct purchase, transport, labour and support costs. Savings and suitability depend on the aircraft and the work. Tell Stella about a representative job and your current fleet; we can discuss a first configuration before a wider order. Our dealer guide covers other accessory lines alongside power.


