At a glance
With our TP-M400-SG2-A, you can switch between manual control and one-click operation through the app. Build your offer around that specific capability, then measure your complete cleaning process before quoting productivity or savings.
Show what you can control from the app
If you already sell or operate DJI Matrice 400, you can evaluate our TP-M400-SG2-A as an additional cleaning accessory. You get a 900 mm aluminum-alloy boom, quick-release mounting and a transport case. You should allow for 350 g for the boom, excluding the fixed base, and add the base, hose and other equipment to your payload calculation.
A demonstration can show manual/app switching, the spray controls and the complete setup. One-click operation controls the spray boom; it does not provide autonomous route planning or unattended cleaning. The team still plans and supervises the flight, manages the hose and checks the surface.
Choose a job you can demonstrate and repeat
Start with a representative facade, glass surface or photovoltaic cleaning task. Agree a test area, acceptable finish and inspection method before you price the whole job. You need to check surface compatibility, water quality, drainage, access and the conditions in which you can operate.
For your working-distance assessment, our stated 7–10 m jet range uses a 2.0 mm nozzle, 10 MPa ground-pump supply, 900 L/h flow and Beaufort force 3 wind. You must not treat the ground-pump pressure as the working-pressure rating of the complete boom, or the jet range as an aircraft flight height. Use our pump and hose guide to prepare the complete water supply.
Turn your preparation into a clear offer
As a distributor, you can consider an equipment sale with separately described configuration checks, a demonstration and handover, where you can deliver those services. If you also carry out cleaning, you can quote an initial clean and propose scheduled visits after you have established a suitable method. You can discuss replacement spray components with us before committing to local stock.
Keep your quotation explicit:
- Identify the aircraft and equipment you supply, the equipment you reuse and the work you undertake.
- Include your site visit, setup, water handling, flight crew, travel and final inspection.
- Define the finish you will assess, weather-related rescheduling and any areas requiring another cleaning method.
Check your margin with completed work
Record preparation, spraying, repositioning, rinsing and packing time during your trial. Divide the accepted cleaned area by your full working time, not just the time with water flowing. You can then compare your fee with equipment, labour, transport, water and repeat-visit costs.
Use your completed jobs to estimate repeat business; cleaning rate, labour needs and payback depend on your setup and site. Tell Stella which aircraft you operate and the cleaning service you want to offer. We can discuss the surface, pump, hose and controls as the equipment scope takes shape. For a broader accessory offer, see our dealer planning guide.

